February 21-23, 2017
AFCEA / WEST 2017
San Diego, California


wow_slider_001
  • UPS & Battery Expansion Module
  • UPS w/2 Battery Expansion Modules
  • 2 UPS & Battery Expansion Module
  • 2 UPS Hot Swap
  • Hot Swappable
  • Power Distribution Unit
  • Tactical Case
  • Tactical Case Rear View
UPS & Battery Expansion Module1 UPS & Battery Expansion Module2 2 UPS & Battery Expansion Module3 2 UPS Hot Swap4 Hot Swappable5 Power Distribution Unit9 Tactical Case10 tacticalcaserearview11

1U UPS


Energy Technologies Inc. introduces the industry’s most powerful 1U high UPS. This 1U high UPS produces a full 2000 Watts continuously from -20 C to +60C ambient with a full 10 minutes of battery backup at 2000 Watts (150% overload for 5 seconds, 110% continuous overload). This UPS if fully compliant with MIL-STD-1399-300B, MIL-STD-810G, MIL-STD-461F, MIL-STD-704F and MIL-STD-1275D.


The UPS is equipped with Lithium Iron Phosphate batteries that provide the lowest weight and maximum backup performance. Several options are available to support your application such as custom designed output configurations, DC input and DC Output requirements. The UPS can be configured for three phase applications, field swappable N+1 applications and be paralleled, up to 32 units.

Features
  • 2000 Watts, 2500 VA output power per module
  • 13 minute run-time per battery module at 2000 W
  • Field replaceable, hot swap battery modules
  • Built in Power Distribution Unit(PDU)
  • High reliability & capacity lithium iron phosphate
  • Full power operation from -20°C to +60°C
  • Power factor correction at AC input
  • True on-line double conversion
  • Cold start with no AC or DC input connections
  • Pure sinusoidal AC output voltage
  • Handles both linear and non-linear loads

N+1 UPS


Battery Expansion Module


  • Hot swappable Battery Modules
  • Same Battery Modules used in the 1U UPS

Built In Intelligent Power Distribution Unit (PDU)


Internal Intelligent PDU with individual output monitoring of Current, Watts and VA. Intelligent features also include the ability to monitor rack or equipment temperatures and interface to HTML pages.


built-in screen controls PDU features from the front of the UPS
Features
  • N+1, N+2, N+x redundancy: Increased reliability
  • 1-phase or 3-phase AC output configurations
  • Up to 32 units can be combined for increased power rating and reliability
  • Available in Mil Spec or COTS versions
  • 1U high rack mount unit (1.73” x 19” x 23.0”)
  • Light weight: <40 lbs. including battery
  • Meets mechanical shock and vibration standards
  • Multiple output connector configurations
  • User I/O and Configuration signal ports

Single or Three Phrase Power


ETI’s line of Ultimate Power Source systems allow for 1 Phase or 3 Phase AC output Configurations.


With the ability to parallel up to 32 UPS modules, 1 Phase configurations are available from 2 kW to 64 kW in 2 kW incriments. 3 Phase configurations are available from 6 kW to 60 kW in 6 kW incriments.


ETI offers 3 Phase capability for both the Mil-Spec and rugged COTS UPS. These configurations include 1 Phase input with 3 Phase output, 3 Phase input with 3 Phase output, and 3 Phase input with 1 Phase output.

3_phase_ups





Information Inquiry
*(denotes required field)
Contact ETI by mail at:
Energy Technologies, Inc.
219 Park Avenue East
Mansfield, OH 44902-1845
USA

Contact ETI by phone or fax:
Voice: 419-522-4444
FAX: 419-522-4466