1U UPS

Energy Technologies Inc. introduces the industry’s most powerful 1U high UPS. This 1U high UPS produces a full 2000 Watts continuously from -20 C to +60C ambient with a full 10 minutes of battery backup at 2000 Watts (150% overload for 5 seconds, 110% continuous overload). This UPS if fully compliant with MIL-STD-1399-300B, MIL-STD-810G, MIL-STD-461F, MIL-STD-704F and MIL-STD-1275D.

The UPS is equipped with Lithium Iron Phosphate batteries that provide the lowest weight and maximum backup performance. Several options are available to support your application such as custom designed output configurations, DC input and DC Output requirements. The UPS can be configured for three phase applications, field swappable N+1 applications and be paralleled, up to 32 units.

• 2000 Watts, 2500 VA output power per module
• 13 minute run-time per battery module at 2000 W
• Field replaceable, hot swap battery modules
• Built in Power Distribution Unit(PDU)
• High reliability & capacity lithium iron phosphate
• Full power operation from -20°C to +60°C
• Power factor correction at AC input
• True on-line double conversion
• Cold start with no AC or DC input connections
• Pure sinusoidal AC output voltage
• Handles both linear and non-linear loads

N+1 UPS

Battery Expansion Module

• Hot swappable Battery Modules
• Same Battery Modules used in the 1U UPS

Built In Intelligent Power Distribution Unit (PDU)

Internal Intelligent PDU with individual output monitoring of Current, Watts and VA. Intelligent features also include the ability to monitor rack or equipment temperatures and interface to HTML pages.

• N+1, N+2, N+x redundancy: Increased reliability
• 1-phase or 3-phase AC output configurations
• Up to 32 units can be combined for increased power rating and reliability
• Available in Mil Spec or COTS versions
• 1U high rack mount unit (1.73” x 19” x 23.0”)
• Light weight: <40 lbs. including battery
• Meets mechanical shock and vibration standards
• Multiple output connector configurations
• User I/O and Configuration signal ports

Single or Three Phrase Power

ETI’s line of Ultimate Power Source systems allow for 1 Phase or 3 Phase AC output Configurations.

With the ability to parallel up to 32 UPS modules, 1 Phase configurations are available from 2 kW to 64 kW in 2 kW incriments. 3 Phase configurations are available from 6 kW to 60 kW in 6 kW incriments.

ETI offers 3 Phase capability for both the Mil-Spec and rugged COTS UPS. These configurations include 1 Phase input with 3 Phase output, 3 Phase input with 3 Phase output, and 3 Phase input with 1 Phase output.